Diesel Boiler 25 kgs for Garment Manufacturing

Working principle of oil-fired boiler: Horizontal oil-fired boiler uses diesel, heavy oil, light oil as fuel, heat-conducting oil as heat transfer medium, and uses a hot oil circulation pump to force the medium to carry out liquid-phase circulation. The heat energy is transferred to the heating equipment and then returned to heating the furnace is reheated, has a high working temperature under low pressure, and can perform high-precision control work on the medium operation. The system has a high heat utilization rate. Due to the overall installation of the module, it is convenient to operate and maintain, and it is an ideal first choice heating equipment for safety, efficiency and energy saving, Heating output up to 350 ° C for hot oil. The temperature can be accurately controlled within the range required by the user, and it can provide heat for multiple heating units at the same time. Through the heat exchanger, hot water, steam, hot air and domestic water can be generated.

Diesel boiler is an environmentally friendly fuel boiler with light diesel as fuel. It has unique environmental and social advantages in replacing coal-fired boilers. How much fuel does a 2 ton diesel boiler consume in an hour?

Diesel hot water boiler:

Fuel consumption calculation formula: G = hot water output * (enthalpy of enthusiasm-enthalpy of incoming water) / (low-level heating value * thermal efficiency), low-level heating value of diesel fuel = 42652kj / kg; low-level heating value of gasoline = 43061kj / kg; Low heat value of crude oil / heavy oil = 44833kj / kg; Low heat value of residual oil = 37646kj / kg;

Diesel steam boiler is the diesel steam boiler hourly steam output D1 = 500 kg; rated steam pressure is 1.0MPa, check the saturated steam pressure meter to get the diesel steam enthalpy i2 = 2771.1 kJ / kg at the working pressure. In general, the boiler feed water temperature is 20 ° C, then the feed water enthalpy i1 = 83.74 kJ / kg; the low-level heating value of 0 # light diesel oil Q = 10100 kcal / kg = 42420 kJ / kg; thermal efficiency of the boiler 0.93. Fuel consumption per hour B1 = D1 (i2-i1) / Q? Ζ = 500 × (2777.1-83.74) /42420?0.93

For example, 2 ton diesel boiler model WNS2-1.0 (1.25) -Y produced by ZOZEN, based on a saturated boiler of 1.25 MPa and a smoke exhaust of 150 degrees, a 2 t / h diesel boiler uses 132 kg of diesel per hour.